manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 109

Cleaning the Print Head

Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check
pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head
consumes ink, so clean the print head only when necessary.

You need to prepare: a sheet of A4 or Letter-sized plain paper

1.

Check that printer is turned on.

2.

Load a sheet of A4 or Letter-sized plain paper in the cassette.

Loading Plain Paper in Cassette

3.

Press the 

OK

 button.

4.

Select 

Maintenance

.

5.

Select 

Cleaning

.

The confirmation screen will appear.

6.

Select 

Yes

.

The printer starts cleaning the print head.

Do not perform any other operations until the printer completes the cleaning of the print head. This takes
about 2 minutes.

The pattern print confirmation screen will appear.

7.

Select 

Yes

.

8.

Press the 

OK

 button.

The nozzle check pattern will be printed.

9.

Select 

Next

.

10.

Examine the nozzle check pattern

.

109

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands