manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 106

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Note

• If the remaining ink level is low, the nozzle check pattern will not be printed correctly. 

Replace the FINE

cartridge

 whose ink is low.

You need to prepare: a sheet of A4 or Letter-sized plain paper

1.

Check that printer is turned on.

2.

Load a sheet of A4 or Letter-sized plain paper in the cassette.

Loading Plain Paper in Cassette

3.

Press the 

OK

 button.

4.

Select 

Maintenance

.

5.

Select 

Nozzle Check

.

The confirmation screen will appear.

6.

Select 

Yes

.

7.

Press the 

OK

 button.

The nozzle check pattern will be printed and two pattern confirmation screens will appear on the LCD.

8.

Select 

Next

.

9.

Examine the nozzle check pattern

.

106

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands