Canon TS5100 series Online Manual Download Page 54

Page: 54 / 433

Loading Paper in the Rear Tray

You can load plain paper or photo paper.

You can also load envelopes on the rear tray.

Loading Envelopes

Important

• If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial

print, it can cause paper jams.

Note

• We recommend Canon genuine photo paper for printing photos.

For details on the Canon genuine paper, see

Supported Media Types

• You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour

Paper SAT213.

For the page size and paper weight you can use for this printer, see

Supported Media Types

1. Prepare paper.

Align the edges of paper. If paper is curled, flatten it.

Note

• Align the edges of paper neatly before loading. Loading paper without aligning the edges may

cause paper jams.

• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the

paper becomes completely flat.

For details on how to flatten curled paper, see

Check3

Paper Is Smudged / Printed Surface Is

Scratched

2. Load paper.

1. Open the rear tray cover (A) and then pull up the paper support (B).

Summary of Contents for TS5100 series


















































































































































































































































































































































































































































Search results

Summary of Contents for TS5100 series

Reviews:

Brands by name

Popular brands

Canon TS5100 series, Online Manual

Search results

Summary of Contents for TS5100 series

Reviews:

Brands by name

Popular brands