Canon TS5100 series Online Manual Download Page 433

Page: 433 / 433

C000

Cause

Printer error has occurred.

What to Do

Cancel printing and turn off the printer.

Check the following:

• Make sure FINE cartridge holder motion is not impeded by stabilizer, jammed paper, etc.

Remove any impediment.

• Make sure the FINE cartridges are properly installed.

Open the scanning unit / cover and press down the ink cartridge locking cover to make sure the FINE
cartridges are properly installed.

Turn the printer back on.

If this does not solve the problem, contact your nearest Canon service center to request a repair.

Important

• When clearing an impediment to FINE cartridge holder motion, be careful not to touch white belt (A).

If you soil or scratch this part by touching it with paper or your hand, it could damage the printer.

433

Summary of Contents for TS5100 series


















































































































































































































































































































































































































































Search results

Summary of Contents for TS5100 series

Reviews:

Brands by name

Popular brands

Canon TS5100 series, Online Manual

Search results

Summary of Contents for TS5100 series

Reviews:

Brands by name

Popular brands