Canon TS3440 Online Manual Download Page 229

Page: 229 / 287

Lines Are Misaligned/Distorted

Check1

Check paper and print quality settings.

Check2

Perform print head alignment.

If printed lines are misaligned/distorted or print results are otherwise unsatisfactory, adjust the print head
position.

Aligning the Print Head

Note

• If the problem is not resolved after performing the print head alignment, perform print head alignment

manually from your computer.

For Windows:

Adjusting Print Head Position Manually

Check3

Increase print quality and try printing again.

Increasing the print quality using the printer driver may improve the print result.

229

Summary of Contents for TS3440
































































































































































































































































































Search results

Summary of Contents for TS3440

Reviews:

Related manuals for TS3440

Brands by name

Popular brands

Canon TS3440, Online Manual

Search results

Summary of Contents for TS3440

Reviews:

Related manuals for TS3440

Brands by name

Popular brands