manualshive.com logo in svg

Canon TS3300 Series, Online Manual

Share
Download
Canon TS3300 Series Online Manual Download Page 95

Cleaning Inside the Printer (Bottom Plate Cleaning)

Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get
dirty, so we recommend performing cleaning regularly.

You need to prepare: a sheet of A4 or Letter-sized plain paper*

* Be sure to use a new piece of paper.

1.

Check that printer is turned on.

2.

Prepare paper.

1.

Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the paper.

2.

Load only this sheet of paper on the rear tray with the open side facing you.

3.

Pull out the paper output tray and the output tray extension.

3.

Press the 

Setup

 button until 

8

 appears on the LCD.

4.

Press the 

Black

 button or the 

Color

 button.

The paper cleans the inside of the printer as it feeds through the printer.

Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning
again.

Note

• When performing Bottom Plate Cleaning again, be sure to use a new piece of paper.

If the problem is not resolved after performing cleaning again, the protrusions inside the printer may be
stained. Wipe off any ink from the protrusions using a cotton swab or the like.

Important

• Before cleaning the printer, turn it off and unplug it.

95

Summary of Contents for TS3300 Series


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands