manualshive.com logo in svg

Canon TS3300 Series, Online Manual

Share
Download
Canon TS3300 Series Online Manual Download Page 83

Deep Print Head Cleaning

If print quality does not improve by the standard cleaning of the print head, clean the print head deeply.
Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean
the print head deeply only when necessary.

1.

Check that printer is turned on.

2.

Press the 

Setup

 button until 

3

 appears on the LCD.

3.

Press the 

Black

 button or the 

Color

 button.

The printer starts cleaning the print head deeply.

The cleaning will be complete when the 

ON

 lamp lights after flashing.

Do not perform any other operations until the printer completes the deep cleaning of the print head. This
takes about 1 to 2 minutes.

4.

Check the print head condition.

To check the print head condition, 

print the nozzle check pattern

.

If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours.

If the problem is still not resolved, 

replace the FINE cartridge

 with a new one. If the problem is still not

resolved after replacing the FINE cartridge, contact your nearest Canon service center to request a repair.

83

Summary of Contents for TS3300 Series


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands