manualshive.com logo in svg

Canon TS3300 Series, Online Manual

Share
Download
Canon TS3300 Series Online Manual Download Page 280

Paper Is Jammed inside Printer

If the jammed paper tears and you cannot remove the paper either from the paper output slot or from the
rear tray, or if the jammed paper remains inside the printer, remove the paper following the instructions
below.

Note

• If the periphery of the paper output slot is dirty with ink, clean it before removing jammed paper.
• If paper becomes jammed during printing and you need to turn off the printer to remove it, press the

Stop

 button to stop the printing before you turn off the printer.

1.

Turn off the printer and unplug it.

2.

Retract paper output tray and open cover.

Important

• Do not touch clear film (A).

If you soil or scratch this part by touching it with paper or your hand, it could damage the printer.

3.

Check if jammed paper is under FINE cartridge holder.

If the jammed paper is under the FINE cartridge holder, move the FINE cartridge holder to the far right or
left, whichever makes it easier to remove the paper.

When moving the FINE cartridge holder, hold the FINE cartridge holder and slide it slowly to the far right
or left.

280

Summary of Contents for TS3300 Series


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands