manualshive.com logo in svg

Canon TS3300 Series, Online Manual

Share
Download
Canon TS3300 Series Online Manual Download Page 183

Scanning Easily (Auto Scan)

Auto Scan allows for automatic detection of the type of the item placed on the platen or ADF (Auto
Document Feeder).

Important

• This function is not supported depending on your model.

• The following types of items may not be scanned correctly. In that case, adjust the cropping frames

(selection boxes; scan areas) in the screen displayed by clicking 

Driver

 in the IJ Scan Utility Lite main

screen, and then scan again.

Photos with a whitish background
Items printed on white paper, hand-written text, business cards, and other unclear items
Thin items
Thick items

• When scanning two or more documents from the ADF, place documents of the same size.

1.

Check that scanner or printer is turned on.

2.

Place items on platen or ADF.

Positioning Originals (Scanning from Computer)

3.

Start IJ Scan Utility Lite.

4.

Click 

Auto

.

Scanning starts.

Note

• To cancel the scan, click 

Cancel

.

• Use the 

Settings (Auto Scan)

 dialog to set where to save the scanned images and to make advanced

scan settings.

• To scan a specific item type, see the following pages.

Scanning Documents and Photos

Scanning with Favorite Settings

183

Summary of Contents for TS3300 Series


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands