manualshive.com logo in svg

Canon TR8600 Series, Online Manual, Page: 350 / 475

Share
Download
Canon TR8600 Series Online Manual Download Page 350

Cannot Proceed beyond Printer Connection Screen (Cannot Find
Printer Connected via USB)

If you cannot proceed beyond the 

Printer Connection

 screen, check the following.

Check1

 Make sure USB cable is securely plugged in to printer and computer.

Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the
back of the printer.

Important

• Check the orientation of the "Type-B" connector and connect to the printer. For details, refer to the

instruction manual supplied with the USB cable.

Check2

 Follow procedure below to connect printer and computer again.

Important

• For macOS, make sure the lock icon is on the lower left of the 

Printers & Scanners

 screen.

If the 

 icon (locked) is displayed, click the icon to unlock. (The administrator name and the password

are necessary to unlock.)

1. Unplug USB cable from printer and computer and connect it again.

2. Make sure no printer operation is in progress and turn off.

3. Turn on printer.

Check3

 Follow the steps below to install MP Drivers again.

350

Summary of Contents for TR8600 Series




























































































































































































































































































































































































































































































Reviews:

No comments