Canon TR7500 Series, Online Manual

Page: 173 / 560

Security control
• FAX number re-entry
If you select ON , you can set the printer to send faxes after entering the number twice. By using this
setting, you can avoid the mistransmission of faxes.
Preventing Mistransmission of Faxes
• Check RX FAX information
If you select ON , the printer checks whether the recipient's fax device information matches the dialed
number. If it matches the number, the printer starts to send faxes.
Preventing Mistransmission of Faxes
• Hook key setting
If you select Enable , you can use the on hook dial function.
• FAX reception reject
If you select ON , the printer rejects the reception of faxes with no sender information or faxes from
specific senders.
Rejecting Fax Reception
• Caller rejection
If you subscribe to the Caller ID service, the printer detects the sender's Caller ID. If the sender's ID
matches the condition specified in this setting, the printer rejects the phone call or fax reception from
the sender.
If you select Yes on the subscribing confirmation screen, you can specify the settings of rejection.
Using Caller ID Service to Reject Calls
Note
• This setting may not be supported depending on the country or region of purchase. Contact your
telephone company to confirm whether it provides this service.
Easy setup
The printer must be set up depending on your telephone line and use of the faxing function. Follow the
procedure according to the instructions on the touch screen.
Note
• You can specify the setup setting individually or the advanced setting.
For details on how to specify the setting:
Preparing for Faxing
173