Canon TM-5300 Online Manual Download Page 705

Page: 705 / 931

Printing is faint

Check 1

Is the reverse side of the paper being used for printing?

Print on the printing surface.

Check 2

Is the print head nozzle blocked?

Print a test pattern to check the nozzles and see if they are clogged.

Checking for Nozzle Clogging

Note

• To automatically check for nozzle blockages after printing, set

Auto nozzle check

in the touch screen

menu to a setting other than

Disable

To show warnings based on nozzle check results, set

Nozzle check error display

in the touch screen

menu to

Enable

However, printing may be stopped by warnings if this setting is set to

Enable

Menu Structure

Check 3

Was the printer left with the ink tank out?

The ink supply may become blocked by ink if the ink tank is left out.

If this happens, leave the printer for at least 24 hours with the ink tank in, and then carry out

Print head

cleaning

Cleaning the Print Head

Check 4

Are paper scraps stuck in the top cover?

Follow the steps below to remove paper scraps left inside the top cover.

1. Open the top cover and make sure that the carriage is not over the platen.

2. Remove any paper scraps left inside the top cover.

Remove Jammed Roll Paper
Remove a Jammed Sheet

3. Close the top cover.

Check 5

Was the paper cut before the ink dried?

Set a longer

Ink drying wait time

Advanced paper settings

in the touch screen menu.

Menu Structure

Check 6

Is the printer driver

Print Quality

set to

Fast

705

Summary of Contents for TM-5300




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TM-5300

Reviews:

Related manuals for TM-5300

Brands by name

Popular brands

Canon TM-5300, Online Manual

Search results

Summary of Contents for TM-5300

Reviews:

Related manuals for TM-5300

Brands by name

Popular brands