manualshive.com logo in svg

Canon TM-5300, Online Manual, Page: 228 / 931

Share
Download
Canon TM-5300 Online Manual Download Page 228

Note

• You can also add the certificate by selecting 

Show Certificate

, checking certificate name to

add, and then selecting the same certificate on Keychain access.

5.

Make sure that fingerprint of certificate detail information matches printer's thumbprint.

The printer's thumbprint is displayed in 

Root cert. thumbprint (SHA-1)

 column or 

Root cert.

thumbprint (SHA-256)

 column when tapped in the following order.

 (

Setup

) > 

Printer information

 > 

System information

6.

If fingerprint of certificate detail information matches printer's thumbprint, display
information on certificate from the menu or by double-clicking the certificate, and select

Always Trust

 on 

Trust

.

The root certificate registration is completed.

Note

• If a password is set on your device, entering a password may be required.

For Chrome on Android

1.

Select 

For secure communication

 on Remote UI.

2.

Select 

Download

.

Downloading the root certificate is started and then 

Name the certificate

 screen is displayed.

3.

As entering the root certificate name is required, enter an arbitrary certificate name and
select 

OK

.

The root certificate registration is completed.

Note

• If PIN or password is not set as security type, the attention screen may appear. Select 

OK

, and

then set the security type to PIN or password.

After Root Certificate Registration

We recommend that you make sure that the correct root certificate has been registered.

To make sure that the correct root certificate has been registered, make sure that thumbprint of
certificate information matches printer's thumbprint. Follow the steps below.

Note

• Some Android devices cannot be checked the thumbprint of a registered route certificate.

228

Summary of Contents for TM-5300




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments