![background image](http://html1.mh-extra.com/html/canon/sx800-realis-sxga-lcos-projector/sx800-realis-sxga-lcos-projector_user-manual_4079446080.webp)
Setting Display Status
80
Selecting an Input Signal Type (ANALOG
PC)
[Input signal select]
You can select a proper resolution if auto
PC adjustment function (
) cannot
project a correct image from a computer.
Press the
OK
button to accept your setting
and then press the
MENU
button.
Select an input signal corresponding to
the resolution of the computer.
• For the signal types supported by the
projector, see the table on page
Selecting an Input Signal Type (VIDEO/S-
VIDEO*)
[Input signal select]
* is only applicable to SX80 MarkII
You can select a proper signal type if a
video image from your AV equipment is
not projected correctly.
Press the
OK
button to accept your setting
and then press the
MENU
button.
• [Auto] is the factory default.
• Refer to the User's Manual of your AV
equipment connected to the projector to
confirm the input signal type.
HDMI
COMPONENT
DIGITAL PC
VIDEO/S-VIDEO
ANALOG PC
USB
Input signal select
Display settings
HDMI
COMPONENT
DIGITAL PC
VIDEO/S-VIDEO
ANALOG PC
USB
Input signal select
Display settings