Canon SX800 - REALiS SXGA+ LCOS Projector, User Manual, Page: 41 / 168

41
Connecting the Projector
Proje
cti
ng
an
Im
age
Commercial or supplied VGA cable (Input signal type: [ANALOG PC-2] - P54 )
• If you use a commercial VGA cable, make sure to use a full connected VGA cable in
which all pins are connected; otherwise, an image may be projected improperly.
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
turns down the sound.
Monitor output
terminal
(mini D-sub 15-pin)
Audio output terminal
(AUDIO OUT)
To input a corresponding
audio signal:
Commercial audio cable
Commercial VGA cable
To AUDIO IN
To ANALOG PC-2/
COMPONENT IN
Computer Projector
Monitor output
terminal
(mini D-sub 15-pin)
Audio output terminal
(AUDIO OUT)
Supplied VGA cable (SX800)
To input a corresponding
audio signal:
Commercial audio cable
To ANALOG PC-2/
COMPONENT IN
To AUDIO IN