Canon Super G3 FAX Board-T1, Installation Procedure

Page: 18 / 22

Chapter 1
10
MEMO:
If you have mounted a full sensor unit, put back the
covers identified as 3-1) through 3-3).
3-1) Rear Cover
3-2) Delivery Upper Cover
3-3) Delivery Cover
3-4) Front Left Cover
3-5) Delivery Tray
While mounting the delivery tray, be sure to take care
not to damage the full state sensor lever [1] and the pa-
per retainer [2].
F-1-27
F-1-28
3-6) Upper Right Cover
3-7) Lower Right Cover
3-8) Machine Rear Left Cover
3-9) Machine Rear Cover
4) Mount the drum unit to the machine.
5) Turn the developing assembly locking lever coun-
terclockwise.
6) Close the left door, cassette, and front cover.
7) Connect one end of the telephone cord to the wall
modular jack and the other end to the iR machine's
modular jack (LINE).
1.2.4 Mounting the Stamp
0010-7398
If the machine is equipped with a DADF, you will
have to fit a stamp ink cartridge.
1) Open the pickup assembly cover and the jam access
cover; then, fit the stamp in place using tweezers.
Make sure that the stamp faces upward.
Be sure to push in the stamp until a click is felt, as the
presence of a gap can cause jams.
F-1-29
2) Close the jam access cover and the pickup assembly
cover.
[2]
[1]
[2]
[1]