Canon Super G3 Fax Board-AF1, Service Manual

Page: 58 / 74

Chapter 5
5-16
5.7.1.3 G3 Signal Transmission Test (G3 Tx)
0025-3164
Of the items indicated below, press one. In response, the DC circuit will be closed and the selected frequency will be transmitted using the G3 signal transmission
function of the modem. You can also monitor the transmission signal by listening to the sound generated by the speaker. To stop the operation and end test mode,
press the key.
F-5-8
F-5-9
'300-ALL0' through '300-4:1' are not currently supported.
<1/2>
<READY>
Report
Sssw Menu Num Ncu Type ISDN Print Clear Test
<G3TX> <MODEM>
OK
300bps
2400bps
4800bps
7200bps
9600bps
TC7200
TC9600
12000bps
<2/2>
<READY>
Report
Sssw Menu Num Ncu Type ISDN Print Clear Test
<G3TX> <MODEM>
OK
14400bps
300-ALL0
300-ALL1
300-1:1
300-1:4
300-4:1