Customization with Custom Functions
C.Fn-00:
(Distance indicator display)
You can select meters or feet for the distance indicator display on the LCD panel.
0: m (Meters (m))
1: ft (Feet (ft))
Note
The right end of the effective flash range on the LCD panel changes to < > when
the effective flash distance exceeds 18 m / 60 ft.
C.Fn-01: (Auto power off)
To conserve power, the Speedlite turns off automatically if left idle for approx. 90 sec., but
this function can be disabled.
0: ON
1: OFF
Note
Auto power off takes effect in approx. 5 min. when the Speedlite is set as a sender
in radio transmission wireless flash photography (
) or configured for linked
When attached to a camera, the Speedlite turns off automatically if left idle for
approx. 90 sec. after the camera has entered auto power off mode.
Setting [
Auto power off
] on the camera to [
Disable
] also disables it on the
Speedlite.
C.Fn-03:
(FEB auto cancel)
You can set whether to cancel FEB automatically after the three shots are taken for FEB.
0: ON (Enabled)
1: OFF (Disabled)
153
