![background image](http://html.mh-extra.com/html/canon/smart-dedicated-design-blm300c/smart-dedicated-design-blm300c_service-support-manual_58074020.webp)
Canon
BLM300C Professional Booklet Maker Service Support Guide
BLM300C Professional Booklet Maker Service Support Guide
July 2014
Revision 2
Page 15
E. Firmware Update
1. Computer Requirements for Upgrading
The same recommended Desktop PC or laptop specifications
3
to download
firmware to the imagePRESS digital Press with the addition of the following
components:
RS-232C (serial crossover cable)
USB to Serial Converter
2. Update Process
The Firmware update process requires that a Software Download Cable is
connected from a PC to specific Printed Circuit Boards (PCBs) located on
the Booklet Maker, Trimmer and Square Fold . Each PCB has a specific
executable file that would need to be run to update the firmware.
The firmware update process for the Rotator requires that a Programming
Logic Cable is connected from a PC to the Programmable Logic Controller
of the Rotator. a specific executable file would need to be run to update the
Rotator firmware.
Table 13 – Software Download Cable
Component
PCB
Required Software
Download Cable Equipment
BLM300
MD6DC B
OPKO00770010
MD6DC C
MD6DC H
CPU
UI
Face Trimmer
MD6DC
Square Fold
MD6DC
Rotator
Programmable Logic Controller
Interface
1060054255
3
Specifications are subject to change without notice.