![background image](http://html.mh-extra.com/html/canon/smart-dedicated-design-blm300c/smart-dedicated-design-blm300c_service-support-manual_58074019.webp)
Canon
BLM300C Professional Booklet Maker Service Support Guide
BLM300C Professional Booklet Maker Service Support Guide
July 2014
Revision 2
Page 14
D. Estimated Installation Times
The estimated Installation times below are the estimated times required for
installation of the Square Fold Booklet-Maker with Two-Knife Trimmer starting
from an unpacked condition. The estimated installation times can be achieved
only with a minimum of two (2) experienced technicians on the Square Fold
Booklet-Maker with Two-Knife Trimmer.
Actual work times may differ from the estimated times shown in the table.
Refer to the Square Fold Booklet-Maker with Two-Knife Trimmer Service
Manual for further details.
Table 12 – Estimated Installation Times
Description
Estimated Time
BLM300C Professional Booklet Maker (without the RTM6940)
60 minutes
BLM300C Professional Booklet Maker (with the RTM6940)
50 minutes
DFD Kit install into HCS-F1
60 minutes
SDD Front Trimmer BLT6989
40 minutes
SDD 2-Knife Trimmer STR6702
40 minutes
SDD Square Fold SFM6904
30 minutes
SDD Rotator RTM6940
60 minutes
SDD Long Belt Stacker BST6800
15 minutes
SDD Short Belt Stacker BST6900
15 minutes