Canon SC A60, User Manual

Page: 37 / 230

33
Prepar
ing the Camer
a, Basic Functions
Using the LCD Monitor
The LCD monitor can be used to compose images while
shooting, adjust settings menus and replay images.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The image in the LCD monitor may darken when the
monitor is used under sunlight or other strong lighting.
This is not a defect.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Shooting Mode
Pressing the button cycles the LCD monitor to the
next mode each time the button is pressed.
Standard Detailed
(No Information) (Information View)
Off
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• The on/off setting of the LCD monitor display mode is
memorized when the camera is turned off. When the
camera is turned on again it assumes the last mode.
However, when the LCD monitor is turned on and the
“Change the Battery Pack” message appears, the LCD
monitor may not automatically turn on the next time the
camera is started.
• When the LCD monitor is set to Standard or Off,
shooting information appears for approximately 6
seconds (The shooting information may not appear
depending on the setting contents of the camera at that
moment.)
• Setting the mode dial to or modes turns the LCD
monitor on regardless of whether it is set to on or off.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○