manualshive.com logo in svg

Canon Satera LBP9500C, User Manual

Share
Download
Canon Satera LBP9500C User Manual Download Page 64

 

63

 

Loading Custom Size Paper (Non-Standard Size Paper) 

 

or Long-size Paper

 

Loading Custom Size Paper in Cassette 1

 

The following custom size paper can be loaded in the supplied paper cassette 
(Cassette 1). 

 

 

Portrait orientation (when the short edges of the paper are parallel to the front side 
of the printer)*
Short edges 182.0 to 297.0 mm; Long edges 182.0 to 297.0 mm

 

 

Landscape orientation (when the long edges of the paper are parallel to the front 
side of the printer)
Short edges 148.0 to 297.0 mm; Long edges 182.0 to 431.8 mm

 

†

 

The paper whose short edges are 100.0 to 147.9 mm can be loaded by using the optional small size paper 
adjuster.

 

* Can be loaded only when the LIPS LX printer driver is used.

IMPORTANT

 

Detailed information about usable paper

 

See "Paper Requirements," on p. 9.

 

Loading Custom Size Paper in the Paper Cassette

 

1

 

Pull out the paper cassette until it stops.

Summary of Contents for Satera LBP9500C








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands