manualshive.com logo in svg

Canon Satera LBP9500C, User Manual

Share
Download
Canon Satera LBP9500C User Manual Download Page 111

 

110

IMPORTANT

 

About replacement toner cartridges

 

For optimum print quality, when you replace toner cartridges, using Canon genuine ones 
is recommended.

 

Be careful of counterfeit toner cartridges

 

Please be aware that there are counterfeit Canon toner cartridges in the marketplace.
Use of counterfeit toner cartridge may result in poor print quality or machine 
performance.
Canon is not responsible for any malfunction, accident or damage caused by the use of 
counterfeit toner cartridge.
For more information, see http://www.canon.com/counterfeit.

 

About disposal of the removed packing materials

 

Dispose of the packing materials according to local regulations.

NOTE

 

About the packing materials

 

The packing materials may be changed in form or placement, or may be added or 
removed without notice.

 

Replacing Toner Cartridges

 

NOTE

 

Checking the status of the toner cartridges of each color

 

You can check the status of the toner cartridges in the display on the control panel.

You can check the status of the toner cartridges also in the [Status] page in the Remote 
UI.

 

Model Name

Supported Canon Genuine Toner Cartridge

 

LBP9600C/LBP9500C

Canon Cartridge 322 Black
Canon Cartridge 322 II Black
Canon Cartridge 322 Yellow
Canon Cartridge 322 II Yellow
Canon Cartridge 322 Magenta
Canon Cartridge 322 II Magenta
Canon Cartridge 322 Cyan
Canon Cartridge 322 II Cyan 

 

Icon

Status

 

The printer is ready to print

The printer is ready to print

The toner cartridge needs to be replaced soon

The toner cartridge has reached the end of its life

Summary of Contents for Satera LBP9500C








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands