manualshive.com logo in svg

Canon Satera LBP7700C, User Manual

Share
Download
Canon Satera LBP7700C User Manual Download Page 90

 

89

 

Precautions When Removing Jammed Paper

WARNING

 

Be careful not to allow jewelry or other metal objects to touch the inside of the 
printer.

 

Some areas inside the printer are subject to high voltage. If metal objects touch the 
inside of the printer, this may result in a fire or electrical shock. 

CAUTION

 

Precautions when removing jammed paper

 

 

Make sure that the fixing unit is completely cool before removing the jammed paper. 
Touching the fixing unit when it is still hot may result in burns.

 

 

The output slot is hot during and immediately after printing. Do not touch the area 
surrounding the output slot, as this may result in burns.

(2)

Output area

<

排紙エリア

 >

"Clearing Paper Jams (Output Area, Right 
Cover Area, Duplex Unit Area, or Cassette 1/2 
Area)" (See p. 92)

(3)

Inside the right 
cover

<

右カバーエリ

ア

 >

(4)

Duplex print 
transport area

<

両面ユニット

エリア

 >

(5)

Cassette 1

<

カセット 1 エ

リア

 >

(6)

Cassette 2

<

カセット 2 エ

リア

 >

(7)

Right cover 
area of 
Cassette 2

<

カセット 2 カ

バーエリア

 >

"Clearing Paper Jams (Cassette 2 Cover 
Area)" (See p. 101)

 

Removal 

Order

Paper Jam 

Area

Message

Clearance Procedure

Summary of Contents for Satera LBP7700C









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands