manualshive.com logo in svg

Canon Satera LBP-3910, User Manual, Page: 17 / 97

Share
Download
Canon Satera LBP-3910 User Manual Download Page 17

16

Printable Area

The following shows the printable area of this printer: However, if you have selected 
the [Print with Upper Left of Sheet as Starting Point] check box in the [Finishing 
Details] dialog box in the LIPS printer driver, you can extend the printable area to 
near the edges of the paper. For more details, see Help of the printer driver.

■

Plain Paper/Heavy Paper/Transparency/Label

You cannot print on any area within 5 mm of the edges of paper.

■

Postcard/Reply Postcard/4 on 1 Postcard

You cannot print on any area within 5 mm of the edges of a postcard.

IMPORTANT

You may not obtain the optimum print quality when printing postcard data with no margin. 
It is recommended that you specify the size of the data a little smaller than the printable 
area for the postcard size.

5 mm

5 mm

5 mm

5 mm

5 mm

5 mm

5 mm

5 mm

東京都千代田区 
○○○ 

123-4567

200 mm

148 mm

5 mm

5 mm

5 mm

5 mm

東京都千代田区 
○○○ 

123-4567

100 mm

148 mm

Summary of Contents for Satera LBP-3910


































































































Reviews:

No comments