Canon Saddle Finisher-T2, Service Manual

Page: 129 / 262

Chapter 3
3-27
3.2.5.2 Removing the Rear
Upper Cover
0009-4128
1) Remove four screws [1] and remove the rear upper
cover [2].
F-3-107
3.2.5.3
Removing the Rear
Lower Cover
0009-4129
1) Remove four screws [1] and remove the rear lower
cover [2].
F-3-108
3.2.5.4 Removing the Escape
Tray Cover
0009-4418
1) Remove four screws [1], open the escape door [2],
and then remove the escape tray cover [3].
F-3-109
3.2.5.5
Removing the Front
Inside Upper Cover
0009-4131
1) Remove four screws [1], open the escape door [2],
and then remove the front inside upper cover [3].
F-3-110
3.2.5.6
Removing the Front
Inside Lower Cover
0009-4132
1) Remove screw [1] and then remove the roller knob
[2].
2) Remove four screws [3] and remove the front inside
lower cover [4].
[1]
[2]
[1]
[1] [2]
[1]
[2]
[1]
[3]
[1]
[1]
[3]
[2]