Canon Saddle Finisher-T2, Service Manual

Page: 108 / 262

Chapter 3
3-6
F-3-21
3.1.4.8 Removing the Grate-
shaped Lower Guide
0009-3626
1) Remove ten screws [1] and remove the grate-
shaped lower guide [2].
When replacing, be careful not to hook the grate-
shaped lower guide to the sensor flag arm on the
delivery side.
F-3-22
3.1.5 Front Inside Upper Cover
3.1.5.1 Removing the Front
Door
0009-4447
1) Open the front door [1] and remove the clip [2].
2) Lift the front door [1] to remove.
F-3-23
3.1.5.2 Removing the Escape
Tray Cover
0009-4411
1) Remove four screws [1], open the escape door [2],
and then remove the escape tray cover [3].
F-3-24
[1]
[3]
[2]
[1]
[1]
[1]
[2]
[1]
[2]
[2]
[1]
[3]
[1]