Canon S830D - S Color Inkjet Printer User Manual Download

Page: 140 / 201

Cannot Install the Printer Driver

140

Troubleshooting

Cannot Install the Printer Driver

■

Follow the installation procedure correctly.

Install the printer driver carefully following the procedures described in the

Quick Start

Guide.

If the printer driver was not installed correctly, reinstall it. If you are using Windows,
delete the printer driver before reinstalling it.

➡

Uninstalling Printer Drivers

Note

➤

If the Installer was forcibly terminated due to an error in Windows, Windows
may be unstable and this will prevent the printer driver from being installed.
Restart the computer before reinstalling the printer driver.

■

Close any other applications before installation.

Sometimes the printer driver cannot be installed because another application is running.

Summary of Contents for S830D - S Color Inkjet Printer










































































































































































































Search results

Summary of Contents for S830D - S Color Inkjet Printer

Reviews:

Related manuals for S830D - S Color Inkjet Printer

Brands by name

Popular brands

Canon S830D - S Color Inkjet Printer, User Manual

Search results

Summary of Contents for S830D - S Color Inkjet Printer

Reviews:

Related manuals for S830D - S Color Inkjet Printer

Brands by name

Popular brands