Canon S800 Reference Manual Download Page 93

Page: 93 / 214

Chapter 6 Troubleshooting

Contents

Index

Replacing ink tanks

1 Make sure the printer is switched on and open the

front cover.

• The Printhead holder moves to the centre

automatically.

2 Press on the tab of the empty ink tank to release it

and pull it out of the slot.

• Use only ink tanks specifically designed for

the S800 printer: BCI-6Bk, BCI-6C, BCI-6M,
BCI-6Y, BCI-6PC Photo, BCI-6PM Photo.
Other ink tanks are not compatible with the
Printhead.

• If more than one ink tank requires

replacement, remove and replace each
empty ink tank one at a time to avoid mixing
them and installing one in the wrong slot. If
an ink tank is installed in the wrong slot,
printing will not execute normally.

• To ensure the correct flow of ink from the ink

tank, never touch the ink port on an ink tank.

• Replace empty ink tanks without removing

the Printhead from the Printhead holder.

• Discard the empty ink tank according to the

local laws and regulations regarding
disposal consumables.

Cautions

Memo

Use the following procedure to replace an empty ink tank.

Summary of Contents for S800























































































































































































































Search results

Summary of Contents for S800

Reviews:

Related manuals for S800

Brands by name

Popular brands

Canon S800, Reference Manual

Search results

Summary of Contents for S800

Reviews:

Related manuals for S800

Brands by name

Popular brands