Canon S100SP User Manual Download Page 117

Page: 117 / 182

Cannot Install the Printer Driver

117

Troubleshooting

Cannot Install the Printer Driver

■

Follow the installation procedure correctly.

Install the printer driver carefully following the procedures described in the

Quick Start

Guide.

If the printer driver was not installed correctly, reinstall it. If you are using Windows,
delete the printer driver before reinstalling it.

➡

Uninstalling Printer Drivers

Note

➤

If the Installer was forcibly terminated due to an error in Windows, Windows
may be unstable and this will prevent the printer driver from being installed.
Restart the computer before reinstalling the printer driver.

■

Close any other applications before installation.

Sometimes the printer driver cannot be installed because another application is running.

Summary of Contents for S100SP























































































































































































Search results

Summary of Contents for S100SP

Reviews:

Related manuals for S100SP

Brands by name

Popular brands

Canon S100SP, User Manual

Search results

Summary of Contents for S100SP

Reviews:

Related manuals for S100SP

Brands by name

Popular brands