Canon RM-Lite, Administrator'S Manual

Page: 83 / 138

Record on a Regular Basis (Repeating Weekly S chedules)
83
S
et
ting a
Recor
d
ing
S
chedule
5
If you initialize the head position (the camera points the
head forward, reinitializes, and then returns the head to
the former position) during recording, the image during
the movement of the head will also be recorded.
When an external camera is connected and [Use External
Video Input] is enabled, the settings on this dialog box are
unavailable.
Note
• Clicking the [Settings] button alone does not perform a preset
tour. You must first configure the settings in the [Preset Tour
Settings] dialog box.
• You are not able to specify preset and camera angles when
configuring the intelligent function or motion detection settings,
or when configuring multiple cameras.
• To be able to select [Preset] or [Preset tour], you must first
register camera angle presets on the camera. For details, see
the camera manual.
Configuring a Preset Tour
Select [Preset Tour] in the [Camera Angle] settings and
specify the order of the presets that are registered in the
camera.
The tour starts with the first preset and proceeds
down the list. Change the order by selecting a preset,
and then clicking [Move Up] or [Move Down].
To remove a preset, select the preset and click
[Remove]. To edit a preset in the list, select the preset
and click [Edit].
1
Click [ S ettings] to display the [Preset Tour S ettings]
dialog box.
2 Click [Add] to open the [Edit Preset Tour] dialog box.
3
S elect a preset from the [Preset] list.
4
Configure the speed and pause settings using the
sliders ([
S peed (PT)], [ S peed (Z)], and [Pause (sec)]).
5
Click [OK].
6
Repeat steps 2 to 5 for additional presets.
7
S pecify the order of the presets.