Setting Display Status
104
Reversing Projection
[Image flip H/V]
Select this setting if you want to hang the
projector from the ceiling or project an
image from behind the screen.
MENU > [Display settings] > [Image flip H/V]
MENU > [Install settings] > [Image flip H/V]
Press the
OK
button to accept your setting
and then press the
MENU
button or
EXIT
button (WX6000 / SX6000).
• [None] is the factory default.
HDMI
Component
Digital PC
Analog PC
None
Select this to project an image
normally.
Ceiling
mounted
Select this to project an image
with the projector hung from the
ceiling.
The projected image is inverted
in both vertical and horizontal
directions.
Rear
Select this to project an image
from behind the screen.
The projected image is inverted
in the horizontal direction.
Rear, Ceil-
ing mounted
Select this to project an image
from behind the screen with the
projector hung from the ceiling.
The projected image is inverted
in the vertical direction.
Summary of Contents for REALiS WUX5000
