Canon REALiS WUX4000 Pro AV, User And Installation Manual, Page: 122 / 240

Setting Various Functions
122
Enabling / Disabling the
Beep
[Beep]
You can select whether a beep sounds or
not when you operate the projector.
MENU > [System settings] > [Beep]
MENU > [System settings] > [Beep]
Press the
OK
button to accept your setting
and then press the
MENU
button or
EXIT
button (WX6000 / SX6000).
• [On] is the factory default.
• The beep will not sound if you mute the
projector sound with the
MUTE
button on
the remote control.
Key Repeat
[Key repeat]
By pressing and holding the button on the
projector or the remote control you can
operate Key repeat in the same was as
when the button is pressed repeatedly.
MENU > [System settings] > [Key repeat]
Press the
OK
button to accept your setting
and then press the
MENU
button or
EXIT
button (WX6000 / SX6000).
• The factory default is [On].
• Even when Key repeat is [Off], Focus adjust-
ment, Zoom Adjustment and Lens shift
adjustment can still be used.
HDMI Component
Digital PC Analog PC
Off
Disables the beep.
On
Enables the beep.
HDMI Component
Digital PC Analog PC
Off
Key repeat is not enabled.
On
Key repeat is enabled.