![background image](http://html.mh-extra.com/html/canon/realis-sx7-mark-ii-d/realis-sx7-mark-ii-d_user-manual_62589069.webp)
69
PRO
JE
CTIN
G
AN IMAGE
FROM A
V
EQU
IPME
NT
Projecting a Video Image from an AV Equipment
You can project a video image with the steps similar to those for projecting an image from a
computer.
This section provides information specific to the projection from an AV equipment.
For more detailed information for each step, refer to the corresponding page.
1
Turn on the projector.
z
Connect the power cord and turn on the projector.
z
Adjust the height of the projecting image.
z
Select a display language for the first time.
z
Adjust the focus by performing the auto setup or the focus adjustment if you can-
not read the message due to out of focus.
2
Prepare the AV equipment.
z
Turn on the AV equipment and start playing the video image.
3
Press the
button to switch the input signal.
z
Select [DIGITAL VIDEO] as the input signal.
4
Press the
button twice.
z
Adjust the input signal, focusing, keystone distortion, and so on automatically
using the auto setup function.
5
Press the
button.
z
Select an appropriate image mode depending on the projecting image.
z
Select an appropriate screen mode from the [Aspect] menu.
Turn off the projector.
z
Turn off the projector and remove the power cord from the AC outlet.
* Those steps are same as those for projecting the computer screen.
For digital content video image:
Stopping projection...