Canon PRO-6000, Online Manual

Page: 72 / 869

Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automatic cut The roll is automatically cut by the cutter
blade according to the printer driver set-
tings.
Roll Paper
1/Roll Paper
2 >
Paper
settings >
Advanced
> Cutting
mode
Automatic
cut Automatic
Cutting
See "Cut-
ting Roll
Paper after
Printing"
(Win-
dows).
See " Cut-
ting Roll
Paper after
Printing
"
(Mac OS).
Yes
Eject (when
the paper
surface is be-
ing scratch-
ed / to wait
for ink to dry) Select this to move the cutter by touch
screen operation and cut paper. With
Auto-
matic cut , the paper drops and may rub
against the basket, resulting in damage to
the print surface, but you can cut using this
method and supporting the paper so that it
does not drop to avoid damage to the pa-
per. Also, you can prevent paper that has
not dried from dropping by visually check-
ing the ink has dried, and then cutting the
paper.
After printing, tap Cut paper and cut the
roll paper on the cutter blade.
Eject cut Yes
Manual
(when using
media that
cannot be cut
with the cut-
ter blade) Select this if the paper cannot be cut on the
cutter blade.
Cut each page from the roll using scissors.
For continuous printing (if you will cut each
page later), select
Automatic Cutting >
Yes or select Print Cut Guideline .
User cut No , Yes , Print
Cut Guideline
Paper cutting
(to have the
roll cut at
your specified
position) Select this when you want to cut the roll pa-
per by operating the cutter blade using the
touch screen after printing with
No or Print
Cut Guideline selected in Automatic Cut-
ting in the printer driver.
Otherwise choose this option if you want to
cut the roll edge after loading a roll.
Roll Paper
1/Roll Paper
2 >
Feed/cut >
Cut paper
Yes No , Print Cut
Guideline
Note
• Automatic and Eject are valid only when you have selected Automatic Cutting > Yes in the printer
driver.
• With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is
cut.
• Eject cut is the preset selection in Cutting mode for some types of paper. For this paper, we
recommend keeping the preset cutting mode.
72