z
Adding a Date Stamp
z
Shots taken without adding a date stamp can be printed with one as
follows.
However, adding a date stamp this way to images that already have
one may cause it to be printed twice.
-
Print using printer functions
-
Use camera DPOF print settings to print
z
Adjusting Image Brightness (Exposure
Compensation)
Auto Exposure Bracketing (AEB Shooting)
z
To clear the AEB setting, set the AEB amount to 0, following the
configuration procedure.
z
AEB shooting is available only in /
/
/ /
/
modes without
using the flash.
z
If exposure compensation is already in use, the value specified for that
function is treated as the standard exposure level for AEB.
z
Changing the ISO Speed
z
Although choosing a lower ISO speed may reduce image graininess,
there may be a greater risk of subject and camera shake in some
shooting conditions.
z
Choosing a higher ISO speed will increase shutter speed, which
may reduce subject and camera shake and enable sufficient flash
illumination for subjects farther away. However, shots may look grainy.
248
Summary of Contents for PowerShot SX70 HS
