Changing the Flash Timing
z
[1st curtain] is used whenever the shutter speed is 1/100 or faster, even
if you select [2nd curtain].
Configuring Safety FE
z
Shots may be captured using settings different from the values
displayed when you press the shutter button halfway.
z
Continuous Shooting
z
During continuous shooting in
mode, focus is locked at the
position determined when you pressed the shutter button halfway.
z
Shooting may stop momentarily or continuous shooting may slow down
depending on shooting conditions and camera settings.
z
As more shots are taken, shooting may slow down.
z
There may be a delay before you can shoot again, depending on
shooting conditions, the type of memory card, and how many shots you
took continuously.
z
Shooting may slow down if the flash fires.
z
Screen display in continuous shooting differs from the images actually
captured and may look out of focus.
z
Fewer continuous shots may be available under some shooting
conditions or camera settings.
z
Using the Self-Timer
z
Even when set, the self-timer has no effect if you press the movie
recording button to start recording.
z
More time is required between shots when the flash fires or when you
have specified to take many shots. Shooting will stop automatically
when the memory card becomes full.
247
Summary of Contents for PowerShot SX70 HS
