manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 305 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 305

305

ç

 Contents

On-Screen Messages

If an error message is displayed, respond as follows.

Shooting or Playback

No memory card

 

●

The memory card may be inserted facing the wrong way. Reinsert the 

memory card facing the correct way (

=

 31).

Memory card locked

 

●

The write-protect switch of the memory card is set to the locked position. 

Switch the write-protect switch to the unlocked position (

=

 31).

Cannot record!

 

●

Shooting was attempted without a memory card in the camera. To shoot, 

insert a memory card facing the correct way (

=

 31).

Memory card error (

=

 262)

 

●

If the same error message is displayed even after you have formatted a 

supported memory card (

=

 3) and have inserted it facing the correct 

way (

=

 31), contact a Canon Customer Support Help Desk.

Insufficient space on card

 

●

There is not enough free space on the memory card to shoot (

=

 58, 

=

 94, 

=

 115) or edit images (

=

 171). Either erase unneeded 

images (

=

 162) or insert a memory card with enough free space 

(

=

 31).

Charge the battery (

=

 29)

No Image.

 

●

The memory card does not contain any images that can be displayed.

Protected! (

=

 156)

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments