manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 270 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 270

270

ç

 Contents

Optional Accessories

The following camera accessories are sold separately. Note that 

availability varies by area, and some accessories may no longer 

be available.

Power Supplies

Battery Pack NB-13L

 

●

Rechargeable lithium-ion battery

Battery Charger CB-2LH/CB-2LHE

 

●

Charger for Battery Pack NB-13L.

 

●

The message [Battery communication error] is displayed if you 
use a non-genuine Canon battery pack, and user response is 
required. Note that Canon shall not be liable for any damages 

resulting from accidents, such as malfunction or fire, that occur 

due to use of non-genuine Canon battery packs.

 

●

The battery pack includes a convenient cover which you can 
attach to know the charge status at a glance. Attach the cover so 
that   is visible on a charged battery pack, and attach it so that 

 is not visible on an uncharged battery pack.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments