manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 258 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 258

258

ç

 Contents

Using Eco Mode

This function allows you to conserve battery power in Shooting 

mode. When the camera is not in use, the screen quickly darkens 

to reduce battery consumption. 

1 

Configure the setting.

 

●

Choose [Eco Mode], and then 

choose [On].

 

●

[

] is now shown on the 

shooting screen (

=

 310).

 

●

The screen darkens when 

the camera is not used for 

approximately two seconds; 

approximately ten seconds after 

darkening, the screen turns off. The 

camera turns off after approximately 

three minutes of inactivity.

2 

Shoot.

 

●

To activate the screen and 

prepare for shooting when the 

screen is off but the lens is still 

out, press the shutter button 

halfway.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments