Canon PowerShot SX620 HS User Manual Download Page 249

Page: 249 / 347

249

Contents

Changing a Device Nickname

You can change the device nickname (display name) that is

displayed on the camera.

●

Following step 4 in “Editing

Connection Information”

(

247), choose [Change

Device Nickname] and press the

[ ] button.

●

Select the input field and press

the [ ] button. Use the keyboard

displayed to enter a new

nickname (

54).

Erasing Connection Information

Erase connection information (information about devices that you

have connected to) as follows.

●

Following step 4 in “Editing

Connection Information”

(

247), choose [Erase

Connection Info] and press the

[ ] button.

●

After [Erase?] is displayed, press

the [ ][ ] buttons to choose [OK],

and then press the [ ] button.

●

The connection information will

be erased.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Search results

Summary of Contents for PowerShot SX620 HS

Reviews:

Canon PowerShot SX620 HS, User Manual, Page: 249 / 347

Search results

Summary of Contents for PowerShot SX620 HS

Reviews: