manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 152 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 152

152

ç

 Contents

 

●

You can return to single-image display from magnified display by 

pressing the [

] button.

Viewing Slideshows

 Still Images 

 Movies

Automatically play back images from a memory card as follows. 

Each image is displayed for about three seconds.

 

●

Press the [ ] button, choose 

[ ] in the menu, and choose the 

desired option (

=

 50).

 

●

The slideshow will start after 

[Loading image] is displayed for a 

few seconds.

 

●

Press the [

] button to stop 

the slideshow.

 

●

The camera’s power-saving functions (

=

 47) are deactivated 

during slideshows.

 

●

To pause or resume slideshows, press the [ ] button.

 

●

You can switch to other images during playback by pressing the 
[ ][ ] buttons. For fast-forward or fast-rewind, hold the [ ][ ] 
buttons down.

 

●

In filtered display (

=

 147), only images matching search 

conditions are played.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments