manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 149 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 149

149

ç

 Contents

Viewing Individual Images in a Group

 Still Images 

 

Movies

Images shot in [

] or [ ] mode (

=

 95, 

=

 114) are grouped 

for display, and these grouped images can be viewed one at a 

time.

1 

Choose a grouped image.

 

●

Press the [ ][ ] buttons to 

choose an image labeled with 

[

].

2 

Choose [ ].

 

●

Press the [ ] button, and 

then choose [ ] in the menu 

(

=

 50).

3 

View images in the group 

individually.

 

●

Pressing the [ ][ ] buttons will 

display only images in the group.

 

●

To cancel group playback, press 

the [ ] button, choose [ ] in the 

menu, and press the [ ] button 

again (

=

 50).

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments