Canon PowerShot SX620 HS User Manual Download Page 134

Page: 134 / 347

134

Contents

Flash

Changing the Flash Mode

Still Images

Movies

You can change the flash mode to match the shooting scene. For

details on the flash range, see “Camera” (

330).

Raise the flash.

●

Move the [ ] switch.

Configure the setting.

●

Press the [ ] button, press the

[ ][

] buttons to choose a flash

mode, and then press the [ ]

button.

●

The option you configured is now

displayed.

●

The setting screen cannot be accessed by pressing the [ ] button

when the flash is lowered. Move the [ ] switch to raise the flash,
then configure the setting.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Search results

Summary of Contents for PowerShot SX620 HS

Reviews:

Canon PowerShot SX620 HS, User Manual, Page: 134 / 347

Search results

Summary of Contents for PowerShot SX620 HS

Reviews: