manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 116 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 116

116

ç

 Contents

Shooting in Program AE ([P] Mode)

 Still Images 

 Movies

You can customize many function settings to suit your preferred 

shooting style.

1 

Enter [ ] mode.

 

●

Follow steps 1 – 2 in “Specific 

Scenes” (

=

 98) and choose 

[ ].

2 

Customize the settings as 

desired (

=

 117 – 

=

 137), 

and then shoot.

 

●

If the optimum exposure cannot be obtained when you press the 
shutter button halfway, the shutter speed and aperture value are 
displayed in orange. In this case, try adjusting the ISO speed 
(

=

 

119) or activating the flash (if subjects are dark, 

=

 134), 

which may enable optimum exposure.

 

●

Movies can be recorded in [ ] mode as well, by pressing the 
movie button. However, some FUNC. (

=

 50) and MENU 

(

=

 52) settings may be automatically adjusted for movie 

recording.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments