manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 108 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 108

108

ç

 Contents

Special Modes for Other Purposes

Auto Shooting after Face Detection 

(Smart Shutter)

 Still Images 

 

Movies

Auto Shooting after Smile Detection (Smile)

The camera shoots automatically after detecting a smile, even 

without you pressing the shutter button.

1 

Choose [ ].

 

●

Follow steps 1 – 2 in “Specific 

Scenes” (

=

 98) and choose [ ], 

and then press the [ ] button.

 

●

Press the [ ][ ] buttons to choose 

[ ], and then press the [ ] button.

 

●

The camera now enters shooting 

standby mode, and [Smile 

Detection on] is displayed.

2 

Aim the camera at a person.

 

●

Each time the camera detects a 

smile, it will shoot after the lamp 

lights up.

 

●

To pause smile detection, press 

the [ ] button. Press the [ ] 

button again to resume detection.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments