Canon Powershot SX520 HS User Manual Download Page 69

Page: 69 / 315

Contents

Common, Convenient Features

Zooming In Closer on Subjects (Digital Zoom)

Still Images

Movies

When distant subjects are too far away to enlarge using the optical
zoom, use digital zoom for up to about 168x enlargement.

Move the zoom lever toward

[ ].

●

Hold the lever until zooming
stops.

●

Zooming stops at the largest
possible zoom factor (before
the image becomes noticeably
grainy), which is then indicated on
the screen.

Move the zoom lever toward

[ ] again.

●

The camera zooms in even closer
on the subject.

●

(1) is the current zoom factor.

(1)

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands