manualshive.com logo in svg

Canon Powershot SX520 HS, User Manual, Page: 45 / 315

Share
Download
Canon Powershot SX520 HS User Manual Download Page 45

45

ç

 Contents

On/Off

Shooting Mode

 

●

Press the power button to turn 
the camera on and prepare for 
shooting.

 

●

To turn the camera off, press the 
power button again.

Playback Mode

 

●

Press the [

] button to turn the 

camera on and view your shots.

 

●

To turn the camera off, press the 
[

] button again.

 

●

To switch to Playback mode from Shooting mode, press the [

] 

button.

 

●

To switch to Shooting mode from Playback mode, press the 
shutter button halfway (

=

 47).

 

●

The lens will be retracted after about one minute once the camera 
is in Playback mode. You can turn the camera off when the lens is 
retracted by pressing the [

] button.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Reviews:

No comments