Canon Powershot SX520 HS User Manual Download Page 38

Page: 38 / 315

Contents

Trying the Camera Out

Still Images

Movies

Follow these instructions to turn the camera on, shoot still images
or movies, and then view them.

Shooting (Smart Auto)

For fully automatic selection of the optimal settings for specific

scenes, simply let the camera determine the subject and shooting
conditions.

Turn the camera on.

●

Press the power button.

●

The startup screen is displayed.

Enter [

] mode.

●

Set the mode dial to [

●

Aim the camera at the subject.
The camera will make a slight
clicking noise as it determines the
scene.

●

Icons representing the scene
and image stabilization mode are
displayed in the upper right of the
screen.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands