manualshive.com logo in svg

Canon Powershot SX520 HS, User Manual, Page: 33 / 315

Share
Download
Canon Powershot SX520 HS User Manual Download Page 33

33

ç

 Contents

Setting the Date and Time

Set the current date and time correctly as follows if the [Date/Time] 
screen is displayed when you turn the camera on. Information you 
specify this way is recorded in image properties when you shoot, 
and it is used when you manage images by shooting date or print 
images showing the date.
You can also add a date stamp to shots, if you wish (

=

 82).

1 

Turn the camera on.

 

●

Press the power button.

 

●

The [Date/Time] screen is 
displayed.

2 

Set the date and time.

 

●

Press the [ ][ ] buttons to 
choose an option.

 

●

Press the [

][

] buttons to 

specify the date and time.

 

●

When finished, press the [

] 

button.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Reviews:

No comments